wire rope end stop socket 1 2
"
RR-S-550D 3-1/2“ galvanisierter Stahldraht-Tampen-Halt
3-1/2" - 3-5/8" Short Bow Socket for Wire Rope, type of Closed Spelter Socket, long-term durability Wire Rope End Fittings Description Our Short Bow Sockets meet RR-S-550D (type B) requirements and are available for wire rope with a diameter from 50mm to 92mm. Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanizati
Galvanisiertes offenes Durchmesser des Sockel-Gesenk Art Kohlenstoffstahl 1/2“
Swage Socket Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic machine and special dies. Our Open Swage Sockets and Closed Swage Sockets are forged from high tensile steel, while
ISO 9001 RR-S-550D 50mm 2" Draht-Tampen-Halt
50mm Open Spelter Socket (with cotter pin), End Fittings for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket with cotter pin meets RR-S-550D (type A) requirements, and is available for wire rope with a diameter from 1/4" to 4". Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties,
0,75 Zoll-Draht-Tampen-Halt, geschlossener Gesenk-Sockel
3/4" Closed Swage Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Swage Socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Closde Swage Socket is available for wire rope with a diameter from 1/4" to 2". - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19, 6 x 25, 6 x 37 construction, with tension strength ranging from 1670
38mm Draht-Tampen-Halt mit Cotter Pin, offener Spelter-Sockel
Open Spelter Socket with cotter pin, 18mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a
1-1/8“ Draht-Tampen-Halt, geschlossener Spelter-Sockel
1-1/8" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
Galvanisiertes Draht-Tampen-Halt des Stahl-4-3/4“, geschlossener Spelter-Sockel
4-3/4" - 5" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Spelter Socket is made in accordance with RR-S-550D (type B) requirements, and available for wire rope with a diameter from 1/4" to 5". The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term
Verzinkte 8 mm Drahtseile Endstop Offene Spelter Steckdosen mit Cotter Pin SOA-08
Open Spelter Socket with cotter pin, 8mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a
Gesenk-Sockel-Draht-Tampen ASME B30.9 offene, die 0,5 Zoll passen
1" Open Swage Socket (with cotter pin), End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Open Swage Socket is an open type swage socket with a spring pin. The socket is forged from high tensile steel, while galvanization ensures its long-term durability. The Open Swage Socket is available for wire rope with a diameter from 6.35mm to 50.8mm. - Reference standard: ASME B30.9 - Our Swage Sockets are recommended used for wire ropes feature 6 x 19
