5 1 wire rope sling assembly
"
50mm Anschlagseil-Versammlung mit offenem Spelter-Sockel
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
5:1 90mm Anschlagseil-Versammlung, offener Spelter Sockel en 13411-4
90mm Wire Rope Sling with Open Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description The open design spelter socket is attached to the end of a wire rope cable by pouring zinc or resin to create the termination. This hardens to hold the socket into place. This type of wire rope slings are used in many wire rope and structural strand termination applications where a high strength, permanent end attachment is required. They are
3/8" Anschlagseil-Versammlung, ASME B30.9 schloss Gesenk-Sockel
3/8" Wire Rope Sling with Closed Swage Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Swage sockets are used with a swaging machine to terminate wire ropes. This type of socket is more resistant to wire fatigue at the point of connection between the socket and cable, but it does not always have as much break strength efficiency as a spelter socket. The swage socket is attached to the end of a wire rope sling by using a hydraulic
Duktile Muffen-Anschlagseil-Versammlung des Eisen-28mm feste
28mm Wire Rope Sling with Solid Thimble Eye, Eye Sling, greater protection against wear and deformation of rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Solid Thimbles are used to protect the eyes of cable and wire rope slings from abrasion by providing a solid steel barrier between the fragile cable strands and the other rigging fitting used in the connection. They are designed according to GB/T 5974.2-2006 for making a 'hard' eye with wire rope,
Vier Beine verstemmten Anschlagseil-Versammlungs-Faser-Kern
Four-leg Swaged Wire Rope Sling (Fibre Core) Product Description - Surface treatment of wire ropes can be galvanized and grease free, galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the shackle. Specification About Anfeng Lifting & Rigging Based in Shanghai Free Trade Zone, Shanghai Anfeng
Faser-Kern-Hand verstärkte Anschlagseil-Versammlung galvanisierte Stahlmaterial
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
Flämische Augen-Ärmel-Muffen-Anschlagseil-Versammlung MPa-Stärke 1670
Single-leg Swaged Wire Rope Sling (Fibre Core) The wire rope slings feature 6 x 37+ FC construction classification, with 1670 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free, galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
50mm galvanisierten Stahlanschlagseil-Versammlung mit offenem Spelter-Sockel
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
48mm Seildurchmesser Seilseilschlinge Montage kundenspezifische Länge mit flämischer Augenhülle und Daumen
Product Description: The Galvanized Steel 48mm 4 Way Wire Rope Slings Lift Sling is a heavy-duty lifting accessory designed to provide optimal strength and durability for various industrial applications. This wire rope sling assembly is equipped with high-quality Flemish Eye Sleeve and Thimble wire rope end fittings, ensuring secure connections and reliable performance. Constructed from premium galvanized steel wire rope with a steel core, this wire rope sling assembly offers
