Premium 1t G80 Lifting Chain Slings | 6/7/8/10/13mm | 2 / 3 / 4 Leg Configurations | Custom OEM Rigging Solutions

In the world of heavy lifting and rigging, precision and safety are non-negotiable. Whether you are operating in the harsh offshore environments of the North Sea, managing complex construction projects in New Zealand, or ensuring workplace safety in a US manufacturing plant, your equipment is only as reliable as its weakest link.

We specialize in the manufacture of high-performance Grade 80 (G80) chain slings, offering fully customizable solutions in 1, 2, 3, and 4-leg configurations. With chain diameters ranging from 6mm up to 13mm and a working load limit (WLL) starting at 1 Tonne, our rigging hardware is engineered to meet and exceed the rigorous demands of the European, American, and Australasian markets .

Product Overview: Engineered for Versatility

Our G80 chain slings are pre-assembled using premium-grade heat-treated alloy steel. Unlike standard off-the-shelf options, our manufacturing process focuses on customization and traceability. We understand that every lift is unique—from the geometry of the load to the attachment points of your crane. Therefore, we offer bespoke lengths, end fittings, and certifications to match your specific project requirements .

Key Technical Specifications

• Grade: G80 (Grade 8)

• Chain Diameters: 6mm, 7mm, 8mm, 10mm, 13mm

• Configurations: Single Leg (1-Leg), Two Leg (2-Leg), Three Leg (3-Leg), Four Leg (4-Leg)

• Safety Factor: 4:1

• Temperature Range: -40°C to +200°C (100% WLL)

• Standards Compliance: Manufactured to meet EN 818, AS 3775, AS 3776, and ASME B30.9 standards .

The 40% Difference: Why Our Slings Stand Out

In a market flooded with generic lifting gear, we provide a distinct advantage. While many competitors offer standard assemblies, 40% of our value lies in our engineering flexibility and surface treatment technology.

1. Fully Customizable Engineering (The "Tailored" Advantage)

Standard slings often fail to accommodate irregular load shapes or specific lift-point geometry. We offer a Custom Engineering Service. We don't just sell slings; we solve lifting problems. Whether you need a 3-leg sling for an unbalanced load or a 4-leg assembly with specific master link sizes for a spreader beam, our team can design and manufacture it. We provide 3D CAD verification and load factor calculations to ensure your custom assembly performs exactly as required .

2. Advanced Corrosion Protection (The "Export" Advantage)

Exporting to New Zealand or offshore locations means battling salt spray and high humidity. While standard slings often arrive with a simple black paint finish that quickly deteriorates, we offer an advanced Dual-Finish Protection System:

• Chain: Blackening treatment for deep-seated corrosion resistance.

• Fittings (Hooks, Links, Rings): Powder-coated in high-visibility orange or yellow. This not only provides a tougher, chip-resistant surface but also ensures high visibility on site, reducing the risk of accidents .

3. 100% Traceability & Certification

Safety compliance in the EU and USA requires strict documentation. Each sling assembly is factory-tested and comes with full material traceability. You will receive:

• Batch numbers stamped on components.

• Serial number tracking.

• Certificates of Conformance and proof load testing documentation .

Configuration & Capacity Guide

Selecting the correct sling is critical for safe operations. Below is a guide to our standard G80 capacities based on configuration. Custom WLL ratings are available for bespoke designs.

Master Link & Chain Compatibility

Our master links are designed to accommodate multiple leg configurations. For example, our enlarged master links allow for smooth articulation of multiple legs without binding, a common point of failure in lesser assemblies .

Single vs. Multi-Leg Performance

The Working Load Limit (WLL) varies significantly depending on the leg count and the angle of lift.

• Single Leg (1-Leg): Ideal for vertical, straight lifts. (e.g., 10mm chain WLL: 3.15t) .

• Two Leg (2-Leg): Perfect for balancing long loads. Provides increased capacity compared to single leg when angles are narrow.

• Three & Four Leg (3/4-Leg): Offers maximum stability for irregular loads. Provides redundancy and stability for crane hoists, ensuring the load remains level .

  • *Example: A 4-leg, 10mm G80 sling can handle up to 8 Tons, distributing the weight evenly to prevent swinging during precision lifts .*

Applications Across Key Markets

Our G80 chain slings are the preferred choice for professionals who demand reliability. They are extensively used in:

• New Zealand & Australian Agriculture & Construction: Lifting heavy timber (logs), farm machinery, and prefabricated steel beams. The rugged construction stands up to the remote job site conditions .

• European Industrial Lifting: Ideal for manufacturing plants and wind turbine maintenance where compliance with EN standards is mandatory. The high-visibility coating aids in routine safety inspections .

• North American Workshops & Transport: Used with engine hoists for transmission removal, towing, and securing heavy equipment on flatbeds .

Why Partner With Us?

We are not just a manufacturer; we are a supply chain partner for global distributors and industrial giants. We have successfully exported to Europe, America, and the Pacific region for years . By choosing our G80 slings, you are investing in:

1. Longevity: Heat-treated alloy steel resists wear and bending.

2. Safety: Automatic welding technology on hooks and links ensures structural integrity .

3. Efficiency: Adjustable grab hooks allow for quick length changes, accommodating various load sizes instantly .

Contact us today to discuss your specific rigging requirements or to request a custom quote for 1t-10t G80 chain slings.