iso 9001 wire rope lifting slings
"
DNV 2.7-1 Typ Drahtseilheber, 4 Beine Drahtseilheber 12,5 Tonnen
12.5 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note,
50mm Anschlagseil-Versammlung mit offenem Spelter-Sockel
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
KERN-gesenktes Drahtseil en 13411-3 weicher Stahlaugen-30mm
30mm Swaged wire rope sling, steel core, soft eye, can be equipped with Flemish Eye Sleeve or Aluminium Ferrule and Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description Our Swaged Wire Rope Slings with steel core feature 6 x 19, 6 x 37 or 8 x 61 Construction, Extra Improved Plow Steel (EIPS) wire rope with an Independent Wire Rope Core (IWRC). Soft Eye Wire Ropes can be hand spliced at either end, or mechanically pressed and secured with a
DNV 2.7-1 Offshore-Container-Hebeschlingen-Set Verzinktes Stahldrahtseil
DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note,the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. All slings are produced according to our DNV Quality management approved system. The sling is the most critical component to
12mm Anschlagseil-Versammlung, Hand verstärktes Anschlagseil
12mm Hand Spliced Wire Rope Sling, steel core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Our
ISO 9001 RR-S-550D 50mm 2" Draht-Tampen-Halt
50mm Open Spelter Socket (with cotter pin), End Fittings for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket with cotter pin meets RR-S-550D (type A) requirements, and is available for wire rope with a diameter from 1/4" to 4". Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties,
7/8" Draht-Tampen-Halt, Edelstahl verlegter Gesenk-Bolzen
7/8" Stainless Steel Threaded Swage Stud, Terminals for Wire Rope, long-term durability Wire Rope End Fittings Description Our Threaded Swage Stud are designed to be swaged or crimped into position.They are used to allow tightening of cable assemblies to specific tensions. Available in left- or right-handed thread. Metric threads available upon request. The Threaded Swage Studs are forged from high tensile stainless steel, while galvanization ensures its long-term durability.
8 Anschlagseil-Versammlung der Tonnen-DNV 2.7-1, 4 Bein-Anschlagseil
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
DNV 2.7-1 4 Bein-Anschlagseil
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
