iso 9001 6 ton lever chain hoist
"
DNV 2.7-1 Typ Drahtseilheber, 4 Beine Drahtseilheber 12,5 Tonnen
12.5 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note,
Kundengebundene endlose Rundschlinge-Hersteller-Polyester Round Slings-Fabrik
80-meter-long Polyester Endless Round Sling Description Our endless round slings are made of high strength polyester industrial yarn. All of the load-bearing polyester yarns in the round slings have a protective polyester sleeve, ensuring product durability and safety when lifting heavy loads. The slings are colour coded to their specific safe working load, from 1 to 1,000 tonnes. This type of product is high breaking strength and relatively small elongation at break. They
30mm gepresste Drahtseil-Anschlagseile mit Stahlkern und weicher Öse, Flemish-Öse oder Kausche als Option
30mm Swaged Wire Rope Sling – Steel Core with Soft Eye (Flemish Eye or Thimble Option) Premium Strength & Flexibility for Heavy-Duty Lifting Our 30mm Swaged Wire Rope Sling is engineered for maximum durability, flexibility, and load-bearing capacity, making it ideal for construction, marine, mining, and industrial rigging. Featuring a steel core (IWRC) and soft eye design, this sling can be customized with a Flemish Eye Sleeve, Aluminum Ferrule, or Thimble for enhanced
GB/T 14737 Stahlanschlagseile des Faser-Kern-einzelne Bein-26mm
26mm Swaged wire rope sling, fibre core, soft eye, can be equipped with Flemish Eye Sleeve or Aluminium Ferrule and Thimble Standard Eye and Thimble Eye Wire Rope Sling, fibre core Description Our Swaged Wire Rope Slings with fibre core feature 6 x 19, 6 x 37 or 8 x 61 Construction, Extra Improved Plow Steel (EIPS) wire rope with a Fibre Core. They are produced in accordance with EN 13411-3: 2004, GB/T 16762-2009, GB/T 14737-2009 requirements. Soft Eye Wire Ropes can be hand
5:1 50mm galvanisierte Stahlanschlagseil-Versammlung
50mm Hand Spliced Wire Rope Sling, fibre core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, fibre core Product Description A Hand Spliced Wire Rope is a common type of Wire Rope Sling. Our Hand Spliced Wire Rope Slings with fibre core feature 6 x 19, 6 x 37 or 8 x 61 Construction, Extra Improved Plow Steel (EIPS) wire rope with a Fibre Core (FC). The end of a single-part Hand Spliced Wire Rope Sling is bent back along the rope to create a looped
1-5/8“ Anschlagseil-Versammlung, 5:1 geschlossener Gesenk-Sockel
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
5:1 90mm Anschlagseil-Versammlung, offener Spelter Sockel en 13411-4
90mm Wire Rope Sling with Open Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description The open design spelter socket is attached to the end of a wire rope cable by pouring zinc or resin to create the termination. This hardens to hold the socket into place. This type of wire rope slings are used in many wire rope and structural strand termination applications where a high strength, permanent end attachment is required. They are
“ Spelter 13411-4 en 1-5/8 Sockel 26mm Seildraht-Installation
Closed Spelter Socket, 26mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Spelter Socket is available for wire rope with a diameter from 6mm to 102mm. The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Specification Product code Rope
Galvanisiertes Draht-Tampen-Halt des Stahl-4-3/4“, geschlossener Spelter-Sockel
4-3/4" - 5" Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Closed Spelter Socket is made in accordance with RR-S-550D (type B) requirements, and available for wire rope with a diameter from 1/4" to 5". The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term
